Modular Hydronic Systems - everyone can do it - just put it together!

Once you look into the PAW system closely, you realize that each pump station has one hot supply and cold return pipe connections, two isolating valves with gauges and a pump.  You have choices to select High-Temp (non-mixing), thermostatic mixing module or Motorized mixing module that connects with flat unions to the manifold. The unique sectional manifold is equipped with cross-over linked channels for isolated system supply and return flows. The available pipe connection sizes are 3/4”, 1” and 1-1/4”.  We simplify the installation into several steps: Position, Secure, Assemble, and Tighten-up.

The final touches are: installing insulation covers, the gauges and mixing valve actuators.

Let us briefly share a success story with you:
This large residential house system we customized for one of our contractor client.  Due to high design flow rates and friction losses, we had to specify Grundfos MAGNA1 32-100F pumps. We did this presentation assembly in our office prior to shipment. It took us about 40 mins, two people worked on the assembly including myself.  I am a 5.3” tall and 120 lbs, non-installer, female in technical sales....


















 

  

Our Modular Hydronic Panel assembly is straightforward, making near-boiler piping to be neat, and compact. The modern-looking insulation shells maintainappearance of a finished unique product and also largely reduce the heat loss. And most important – you’ll get same result and success every time, all the time!

 “All I did was just put the thing up, a lot of it was just the PAW – it’s easy to make it look good.”
 

Eric C. Foster Plumbing, Heating& Cooling