DELTASOL® MX System controller Full Kit-Great Deal in Dec

RESOL DeltaSol MX Controller Data Sheet    

Features:

• 14 relay outputs and 12 inputs for Pt1000, Pt500 or KTY temperature sensors
• Up to 5 extension modules via RESOL VBus® (45 sensors and 39 relays in total)
• Inputs for analogue and digital Grundfos Direct Sensors™ as well as 1 FlowRotor
• Speed control of standard and high-efficiency pumps
• Data logging, storing and firmware updates via SD memory card 
• Hydronic Heating Circuits ( talking to Dry-Contact regular room thermostat) up to 10 zones with outdoor temperature reset, Hydronic Cooling over the heating circuit with condensation detection by means of a dew point switch, DHW pirority control 
• Simplified timer, 0-10 V boiler control and DHW preheating
• Basic solar systems also for 3 collector fields                                                        

Technical Data: 

Inputs: 12 Pt1000, Pt500 or KTY temperature sensor inputs (can optionally be used for remote controls, operating mode switches or potential-free switches), 3 impulse inputs for V40 flowmeters, 1 input for a FlowRotor, 1 CS10 solar cell, 4 Grundfos Direct Sensors™ (2 x analogue, 2 x digital*)
Outputs: 14 relays, 13 of them semiconductor relays for pump speed control, 1 dry-contact relay and 4 PWM outputs (convertible to 0-10 V signal outputs)
PWM frequency: 512 Hz
PWM voltage: 10.5 V
Switching capacity: 
1 (1) A 240 VAC (semiconductor relay)
4 (2) A 24 VDC / 240 VAC (dry contact relay)
Total switching capacity: 6,3 A 240 VAC
Power supply: 100 ... 240 VAC, 50-60 Hz
Standby: 0,82 W
Temperature controls class: VIII
Energy efficiency contribution: 5 %
Mode of operation: type 1.B.C.Y action
Rated impulse voltage: 2.5 kV
Data interface: RESOL VBus®, SD card slot
VBus® current supply: 35 mA
Functions: 7 integrated energy metering modules and control of 2 weather-compensated heating circuits. Adjustable system parameters and add-on options (menu-driven), balance and diagnostics functions, functionality control
Housing: plastic, PC-ABS and PMMA
Installation: wall mounting, mounting into patch panels is possible
Indication/Display: full graphic display
Operation: 7 push buttons at the front
Ingress protection: IP 20 / EN 60529
Protection class: I
Ambient temperature: 0 ... 40 °C / 32 ... 104 °F
Pollution degree: 2
Dimensions: 253 x 200 x 47 mm / 10.1" × 7.9" × 1.7"

RESOL DeltaSol MX Controller Installation Manual V2.02   

RESOL DeltaSol MX Controller Installation Manual V2.07