4-Zone / 4 Temperature Hydronic Zone Panel (209.0 MBH @ 20ºF
The pre-engineered P-Series Modular Hydronic Zone Panel is a
distribution system for Hydronic heating, designed to work with heat sources of
different types and brands, zone controls, and/or thermostats.
Modular Hydronic Zone panel is a compact, pre-piped mechanical system
complete with circulator, isolation ball valves, thermometers and insulation
shells to control heat loss. Modular Hydronic Zone panels are intendetdto speed
up installation by connecting directly to a hydronic heating system, providing
a complete and compact piping and mixing system in a box.
P-Series 4-ZONE THERMOSTATIC MIXING Panels of different pipe sizes can
handle from 37,700 up to 209,000 Btu/h. Three (3) Modular Hydronic Mixing
Zone modules are equipped with thermostatic 3-way valve designed to provide low
temperature floor heating. The valve has a manual adjustment knob used for setting
the supply temperature point of a single low temperature zone. One (1) High
Temperature Zone Module can provide a wide range of control to accommodate many
project applications from indirect water heaters to hydronic air handlers and baseboards.
The panel is easy to assemble, takes only minutes to connect and reduces
installation expertise requirements. This unique design allows the P-Series
Zone Panel to be installed in a variety of constricted spaces for new
installations or retrofits. The panel can be installed in a vertical or
horizontal position. An optional low-loss header can be added to act as
hydraulic break, separating boiler and system circuits from each other. The
low-loss header is required to hydraulically isolate the primary boiler loop
from the secondary zone loop if boiler has a built-in pump, or its specified
flow rate differs from the flow rate of zone circulators in the distribution
A Division of Solarnetix Inc.