3 Zone/3-Temperature Hydronic Zone Panel (114.0 MBH @ 20ºF dT)
The pre-engineered P-Series Modular Hydronic Zone Panel is a
distribution system for Hydronic heating, designed to work with heat sources of
different types and brands, zone controls, and/or thermostats.
Modular Hydronic Zone panel is a compact, pre-piped mechanical system
complete with circulator, isolation ball valves, thermometers and insulation
shells to control heat loss. Modular Hydronic Zone panels are intended to speed
up installation by connecting directly to a hydronic heating system, providing
a complete and compact piping and mixing system in a box.
P-Series - 3 ZONE THERMOSTATIC MIXING Panels of different pipe sizes can
handle from 37,7000 up to 114,000 Btu/h. Modular Hydronic Mixing Zone
module equipped with thermostatic 3-way valve designed to provide low
temperature floor heating. The valve has a manual adjustment knob used for setting
the supply temperature point of a single low temperature zone. 2 High
Temperature Zone Modules can provide a wide range of control to accommodate
many project applications from indirect water heaters to hydronic air handlers and
The panel is easy to assemble, takes only minutes to connect and reduces
installation expertise requirements. This unique design allows the P-Series
Zone Panel to be installed in a variety of constricted spaces for new
installations or retrofits. The panel can be installed in a vertical or
horizontal position. An optional low-loss header can be added to act as hydraulic
break, separating boiler and system circuits from each other. The low-loss
header is required to hydraulically isolate the primary boiler loop from the
secondary zone loop if boiler has a built-in pump, or its specified flow rate
differs from the flow rate of zone circulators in the distribution system.
A Division of Solarnetix Inc.