2-ZONE with 1-MOTORIZED MIX 3/4
1x Hi Temp Module and 1 x MOTORIZED MIX Module
( Max. 96.6 MBH & 9.8 GPM @ ΔT-20ºF)
3/4“ Connection

2-ZONE with 1-MOTORIZED MIX 3/4" MODULAR HYDRONIC SYSTEM

Up to 96.6 MBH, 9.6 GPM @ dT-20ºF
P-SERIES HI-LOW TEMP PANEL including 1 HI TEMP and 1 Motorized mixing Pump-Zone Modules, 24VAC-3 wire valve actuator and Distribution Manifold
Part Number: V2-20-3132
Availability: In Stock. Free Shipping.
You need to be a registered customer to see your discount and order this product. Please Login to your account or click here to Register.

2-Zone / 2-Temperature Hydronic Zone Panel (96.6 MBH @ 20ºF dT)

The pre-engineered P-Series Modular Hydronic Zone Panel is a distribution system for Hydronic heating, designed to work with heat sources of different types and brands, zone controls, and/or thermostats.

Modular Hydronic Zone panel is a compact, pre-piped mechanical system complete with circulator, isolation ball valves, thermometers and insulation shells to control heat loss. Modular Hydronic Zone panels are intended to speed up installation by connecting directly to a hydronic heating system, providing a complete and compact piping and mixing system in a box. 

P-Series – 2-ZONE MOTORIZED MIXING Panels of different pipe sizes can handle from 40,000 up to 96,600 Btu/h. One (1) Modular Hydronic Mixing Zone module is equipped with 24 volt floating action 3-way valve designed to provide low temperature floor heating by connecting the mixing valve to the mixing control of your choice. One (1) High Temperature Zone Module can provide a wide range of control to accommodate many project applications from indirect water heaters to hydronic air handlers and baseboards.

The panel is easy to assemble, takes only minutes to connect and reduces installation expertise requirements. This unique design allows the P-Series Zone Panel to be installed in a variety of constricted spaces for new installations or retrofits. The panel can be installed in a vertical or horizontal position. An optional low-loss header can be added to act as hydraulic break, separating boiler and system circuits from each other. The low-loss header is required to hydraulically isolate the primary boiler loop from the secondary zone loop if boiler has a built-in pump, or its specified flow rate differs from the flow rate of zone circulators in the distribution system.

Related Items

Browse Similar Items

Recently Viewed Items

TOP